04-04-2023, 08:39 PM
concrete surfaces
Concrete is a material consisting of cement, water, sand, and gravel. It is the base layer that is placed and used in construction, especially the external surfaces. There is no doubt that homes or facilities are exposed to heat and rainwater, which is one of the most weather factors that affect concrete surfaces, and for this reason many people resort to using them. The roof from the inside, as well as to avoid extreme cold and extreme heat during the winter and summer seasons.
Methods for isolating concrete surfaces
Surface insulation from heat
Undoubtedly, the concrete material absorbs heat, so there are many materials that have been manufactured for use in thermal insulation, and among these materials that are widely used:
Rock wool: It is either in the form of tiles attached to the surface, or by means of mosaic tiles that contain a large proportion of rock wool.
Perlite material: It is a multifaceted mineral material that is expensive in financial terms, and it is one of the materials used for thermal insulation, as this material is spread on the surface in special ways, or it is placed in concrete, like this material. It reflects heat, and it also acts as a soundproofing material.
Surface insulation from moisture
The roof may not be devoid of cracks through which water seeps into the ceiling, causing moisture, which is one of the most common problems that homes suffer from. Some methods of waterproofing roofs:
Bitumen sheets: They are sheets that contain bitumen, as they are stabilized by gas heat, and this material works to prevent water leakage from roofs.
Water glass: A substance dissolved in water and used by a spray gun, as it is sprayed directly on the surface.
Silica material: It is one of the strong materials in insulation, as it is mixed with cement to be a basic material in concrete, as silica granules strengthen the particles of the cement mixture.
Rock wool: It is also included in the waterproofing when poured with a concrete layer.
Paraffin: used as water glass.
Polystyrene or cork layers: It is one of the modern methods of insulation, and it consists of blocks stacked well on the surface, then a cement layer is placed on top of it, and it is a good method used in sound insulation. .
Asphalt: It is one of the common methods of insulation, where the asphalt material sold in drums is brought and heated and melted until it becomes liquid, then it is spread on the surface and left to dry.
TRANSLATED FROM:
كشف تسربات المياه بالرس
عزل خزانات بالقصيم
شركة كشف تسربات المياه بالرس
Concrete is a material consisting of cement, water, sand, and gravel. It is the base layer that is placed and used in construction, especially the external surfaces. There is no doubt that homes or facilities are exposed to heat and rainwater, which is one of the most weather factors that affect concrete surfaces, and for this reason many people resort to using them. The roof from the inside, as well as to avoid extreme cold and extreme heat during the winter and summer seasons.
Methods for isolating concrete surfaces
Surface insulation from heat
Undoubtedly, the concrete material absorbs heat, so there are many materials that have been manufactured for use in thermal insulation, and among these materials that are widely used:
Rock wool: It is either in the form of tiles attached to the surface, or by means of mosaic tiles that contain a large proportion of rock wool.
Perlite material: It is a multifaceted mineral material that is expensive in financial terms, and it is one of the materials used for thermal insulation, as this material is spread on the surface in special ways, or it is placed in concrete, like this material. It reflects heat, and it also acts as a soundproofing material.
Surface insulation from moisture
The roof may not be devoid of cracks through which water seeps into the ceiling, causing moisture, which is one of the most common problems that homes suffer from. Some methods of waterproofing roofs:
Bitumen sheets: They are sheets that contain bitumen, as they are stabilized by gas heat, and this material works to prevent water leakage from roofs.
Water glass: A substance dissolved in water and used by a spray gun, as it is sprayed directly on the surface.
Silica material: It is one of the strong materials in insulation, as it is mixed with cement to be a basic material in concrete, as silica granules strengthen the particles of the cement mixture.
Rock wool: It is also included in the waterproofing when poured with a concrete layer.
Paraffin: used as water glass.
Polystyrene or cork layers: It is one of the modern methods of insulation, and it consists of blocks stacked well on the surface, then a cement layer is placed on top of it, and it is a good method used in sound insulation. .
Asphalt: It is one of the common methods of insulation, where the asphalt material sold in drums is brought and heated and melted until it becomes liquid, then it is spread on the surface and left to dry.
TRANSLATED FROM:
كشف تسربات المياه بالرس
عزل خزانات بالقصيم
شركة كشف تسربات المياه بالرس